Subwoofer QSC AcousticDesign AD-S112SW

Subwoofer QSC AcousticDesign AD-S112SW: Subwoofer de 12", resistente a la intemperie, opera a baja impedancia 8Ω (300W), incluye sistema de montaje, presión sonora 115dB, disponible en negro.

La serie AcousticDesign ™ ofrece a los integradores una solución de sonido instalada de primera calidad en rendimiento, cobertura y la estética son primordiales. Combinado con inédita facilidad de instalación y alta resistencia a la intemperie, la serie AcousticDesign ™ ofrece integradores una solución versátil y seguro instalar a través de una amplia variedad de aplicaciones de refuerzo de sonido de primer plano y de fondo.

Cobertura consistente e incluso de revolución se logra a través DMT ™ (Directividad Transición Igualados), una innovación QSC que coincide con los patrones de directividad del altavoz de graves y la guía de ondas de alta frecuencia en el punto de cruce. El resultado es una transición coherente entre transductores y mejorar la respuesta fuera del eje.

Principales características del Subwoofer QSC AcousticDesign AD-S112SW

  • 2” weather treated woofer
  • TFR™ (Turbulent Flow Reduction) port provides optimal resonant tuning and high velocity air flow
  • Maximum peak SPL 121 dB
  • Suggested filter points: 32 Hz high-pass, 24 dB/octave Butterworth; 100 Hz low-pass, 24 dB/octave Butterworth
  • Included YMS12 yoke mount maximizes boundary plane coupling while reducing vibration transmission
  • Optional M10 Kit-C for additional installation versatility
  • Lightweight ABS enclosures offer long-term durability and lasting good looks
  • Sealed input panel cover and powder coated aluminum grilles for added weather resistance
  • Meets IEC60529 IP-54 for dust and splash resistance
  • Available in black (RAL 9011)
  • Complete EASE, CF2, CAD, and BIM information available online

Especificaciones técnicas del Subwoofer QSC AcousticDesign AD-S112SW

System Details AD-S112sw
Effective frequency range1 30 to 135 Hz
Rated noise power / voltage2 300 watts / 50 volts (rms)
3 90 dB SPL
Coverage angle (-6 dB)  
Directivity factor (Q)  
Directivity Index  
Maximum continuous SPL4 115 dB
Maximum peak SPL4 121 dB
Rated impedance 8 ohms
Recommended amplifier power (loudspeaker "program" power) 600 watts
Transformer taps n/a
HF transducer  
LF transducer 12” weather resistant paper cone woofer,
2.5” / 64mm voice coil
Input connector type Euroblock connector with parallel output terminals
Enclosure material Painted ABS polymer
Grille material Powder coated aluminum
Yoke material Powder coated galvanized steel (included)
Enclosure Details
Ingress protection IP-54
Operating environment Designed for indoor and outdoor use
Testing The AD Series loudspeakers qualified for outdoor use using the following tests:

  • Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
  • Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
  • High and low temperature: tested to QSC internal standards between -20° and 50° C
Net weight 29 lb / 13.2 kg
Product dimensions 23.4” × 13.9” × 12.7” (594 × 354 × 323 mm)
Shipping weight 43.1 lb / 19.6 kg
Shipping dimensions 27.5” x 21.75” x 18.5” (698 x 552 x 470 mm)
Included accessories YMS12 yoke mounting system, Euroblock connector,
input panel cover
Optional accessories  
1 Free-field, -10 dB from on-axis sensitivity
2 IEC60268-1 noise signal for 2 hours
3 On-Axis, free-field sensitivity, 2.83V, 1 m
3 On-Axis, free-field sensitivity, 2.83 V, 1 m
4 Calculated from rated noise voltage and sensitivity
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

Descargue la ficha técnica completa.

COTIZAR

Paga con tarjeta de crédito a meses con cargo adicional.

No hay comentarios

Agregar comentario

Debe ser Conectado para agregar comentarios.

— by Soluciones Tecnológicas en Informática, S.A. de C.V.